Search
 
 
 
 
Paints
Adhesives
Tiles

Auto Refinishes
Wood Finish
Industrial
Marine

 
Locate a store
   
 
Meyer Wall Satin
 
 
IDENTIFICATION

Description: A water based satin finish.
Product Name: MEYER WALL SATIN
Use:Non-toxic bituminous solution for protection of
Anchors, chains lockers especially suited for
Tanks used for potable water storage.

PHYSICAL DESCRIPTION/PROPERTIES

Appearance: Black
Viscosity: viscous Liquid
Theoretical coverage (m2/lt): 10m2/lt
Flash Point: 40OC
Number of components (Resins): N/A

 
 
Minimum cure temperature: N/A
Percent non-Volatile (by weight): 41% by volume
Specific Gravity (water=1): 0.9 g/cm3d
Drying time(dust free): 30 mins at 28OC
Min interval before over coating: 3 hours at 28OC, 10 HOURS AT 5O-10OC


APPLICATION DATA

Application surface: Steel, Concrete
Surface preparation: For galvanized steel, use self-etch primer
Method of application: spry ,roller/ brush
Mixing ratio (with hardener): N/A
Shelf life: 18 months under adequate storage condition


HEALTH HAZARD INFORMATION

HEALTH EFFECTS

SKIN: Irritating to skin upon repeated, prolonged contact.

EYES: Moderately irritating to eyes.

INHALED: Vapour or mist is irritating to mucus membranes and respiratory system.
Excessive inhalation can cause headache, nausea, and dizziness.

SWALLOWED: Can be harmful if swallowed.

LONG TERM HAZARD: Repeated and prolonged occupational over exposure to solvents can damage liver and central nervous system..

FIRST AID:-

SKIN: Wash affected area thoroughly with soap and water.

EYES: Flush eyes immediately with plenty of water for at least
15 minutes and get medical attention.

INHALED: Provide fresh air, give oxygen or artificial respiration if
breathing is laboured.

SWALLOWED: If swallowed dilute by giving two glasses of water to
drink. Do not induce vomiting consult physician immediately. Never give anything by mouth to an unconscious person.

ADVICE TO DOCTOR: Treat symptomatically


PRECAUTIONS FOR USE

PERSONAL PROTECTION

SKIN: Wear protective clothing, Gloves of neoprene or nitrile
rubber.

EYES: Use solvent resistant safety eyewear with splashguards
or side shields to prevent eye contact.

BREATHING: Use half face respirator with type A organic vapour filter
and class P1 particulate filter.

OTHERS: Use in a well-ventilated area with explosion-proof
equipment.

VENTILATION: Sufficient ventilation in volume and pattern should be
provided to keep air contaminant concentration low.


SAFE HANDLING INFORMATION

STORAGE AND TRANSPORTATION

STORAGE TEMPERATURE: min 10C, max. 400C. Store cool at constant temperature.

CONTAINER TYPE AND MATERIAL: Steel drums.

CONDITIONS TO AVOID: Heat, open flame, or sparks

TRANSPORTATION: By road and water (Never by air)

HAZARDOUS POLYMERISATION: Will not occur


SPILLS: Keep spectators away and avoid breathing vapours. Floor may be slippery, be careful to avoid falling. Dike and curtail spill with inert materials, e.g. sand. Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal. Keep spills and as much as possible, cleaning run off out of municipal sewers and opens bodies of water.

DISPOSAL: Incinerate the liquid and contaminated diking material at
a permitted facility, or otherwise, dispose off in accordance with all applicable regulations.

EXTINGUISHING MEDIA: Foam, carbon dioxide, Dry chemicals

SPECIAL FIRE FIGHTING Wear self-contained breathing apparatus. Closed
PROCEDURE: container may explode when exposed to extreme heat.

OTHER INFORMATION: Isolate form heat, electrical equipment, sparks and open
fire.


 
 

 
 
 
 
 
 
 
 
 
 

Locate an Outlet | Contact us | Privacy Policy | Terms
Copyright ©
2006 DN MEYER PLC