Search
 
 
 
 
Paints
Adhesives
Tiles

Auto Refinishes
Wood Finish
Industrial
Marine

 
Locate a store
   
 
ULTIMATE EMULSION
 
 
IDENTIFICATION

Description: GLOSS PAINT
Product Name: ULTIMATE GLOSS
Use: FOR INDOORS AND OUTDOORS

PHYSICAL DESCRIPTION/PROPERTIES

Appearance: Glossy Finish
Colour: See colour chart
Viscosity: viscous Liquid
Theoretical coverage (m2/lt): 10-12m2/lt
Flash Point: N/A
Number of components (Resins): N/A

 
 
Minimum cure temperature: N/A
Percent non-Volatile (by weight): 75% by volume
Specific Gravity (water=1): 1.0 g/cm
Drying time(dust free): 1-2Hrs
Min interval before over coating: 16 hours


APPLICATION DATA

Application surface: Steel, Concrete
Surface preparation: free from dust,grease and contaminants
Method of application: brush
Mixing ratio (with hardener): N/A
Shelf life: 12 months under adequate storage condition



HEALTH HAZARD INFORMATION

HEALTH EFFECTS

SKIN: Irritating to skin upon repeated, prolonged contact

EYES: Moderately irritating to eyes.

INHALED: Vapour or mist is irritating to mucus membranes and respiratory system.
Excessive inhalation can cause headache, nausea, and dizziness.

SWALLOWED: Can be harmful if swallowed.

LONG TERM HAZARD: Repeated and prolonged occupational over exposure to solvents can damage liver and central nervous system..
FIRST AID:-

SKIN: Wash affected area thoroughly with soap and water
EYES: Flush eyes immediately with plenty of water for at least 15 minutes and get medical attention.

INHALED: Provide fresh air, give oxygen or artificial
Respiration if breathing is laboured.

SWALLOWED: If swallowed dilute by giving two glasses
of water to drink. Do not induce vomiting consult physician immediately. Never give anything by mouth to an unconscious person.

ADVICE TO DOCTOR: Treat symptomatically

PRECAUTIONS FOR USE

PERSONAL PROTECTION

SKIN: Wear protective clothing, Gloves of neoprene or nitrile rubber.
EYES: Use solvent resistant safety eyewear with
Splashguards or side shields to prevent eye Contacts
BREATHING: Use half face respirator with type A
Organic vapour filter and class P1 particulate filter

OTHERS: Use in a well-ventilated area with explosion-Proof equipment.

VENTILATION: Sufficient ventilation in volume and pattern Should provide to keep air contaminant concentration low.


SAFE HANDLING INFORMATION

STORAGE AND TRANSPORTATION

STORAGE TEMPERATURE: min 10C, max. 400C. Store cool at constant temperature.

CONTAINER TYPE AND MATERIAL: Steel drums.

CONDITIONS TO AVOID: Heat, open flame, or sparks

TRANSPORTATION: By road and water (Never by air)

HAZARDOUS POLYMERISATION: Will not occur


SPILLS: Keep spectators away and avoid breathing vapours. Floor may be slippery, be careful to avoid falling. Dike and curtail spill with inert materials, e.g. sand. Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal. Keep spills and as much as possible, cleaning run off out of municipal sewers and opens bodies of water.

DISPOSAL: Incinerate the liquid and contaminated diking material at a permitted facility, or otherwise, dispose off in accordance with all applicable regulations.

EXTINGUISHING MEDIA: Foam, carbon dioxide, Dry chemicals

SPECIAL FIRE FIGHTING Wear self-contained breathing

PROCEDURE: apparatus closed container may explode when exposed to extreme heat.

OTHER INFORMATION: Isolate form heat, electrical equipment, sparks and open fire.



 
 

 
 
 
 
 
 
 
 
 
 

Locate an Outlet | Contact us | Privacy Policy | Terms
Copyright ©
2006 DN MEYER PLC