Number
of components (Resins): 1
Minimum cure temperature: N/A
Percent non-Volatile (by weight): N/A
Specific Gravity (water=1): 1.5±0.2 g/cm3
Drying time(surface): 1hour at28°C
Min interval before over coating: N/A
APPLICATION
DATA
Application surface:
Cement, Brickwork, Concrete,
Surface preparation: free from dust, grease & contaminants
Method of application: brush & roller
Mixing ratio (with primer): 10L of paint to 0.75kg
of primer for first coat while second coat is applied
without primer
Shelf life: 12 months under adequate storage condition
Life span: 15-20years (if all the application procedures
are strictly adhered to)
FEATURES
Excellent adhesion to concrete, stones and plaster
Cover up slight irregularities, cracks and imperfections Highly durable
Flexible
Can be redecorated with either Ultimate or Imperial Emulsion
Extra protected from Fungal attack with DFPTM
HEALTH HAZARD INFORMATION
HEALTH EFFECTS
SKIN: Irritating to skin upon repeated,
prolonged
Contact
EYES: Moderately irritating to eyes.
INHALED: Vapour or mist is irritating to mucus membranes
and respiratory system.
Excessive inhalation can cause headache, nausea, and
dizziness.
SWALLOWED: Can be harmful if swallowed.
LONG TERM HAZARD: Repeated and prolonged occupational
over exposure to solvents can damage liver and central
nervous system.
FIRST AID:-
SKIN: Wash affected area thoroughly with soap and
water
EYES: Flush eyes immediately with plenty of water for
at least 15 minutes and get medical attention.
INHALED: Provide fresh air, give oxygen or artificial
Respiration if breathing is labored.
SWALLOWED: If swallowed dilute by giving two glasses
of water to drink. Do not induce vomiting consult physician
immediately. Never give anything by mouth to an unconscious
person.
ADVICE TO DOCTOR: Treat symptomatically
PRECAUTIONS FOR USE
PERSONAL PROTECTION
SKIN: Wear protective clothing, Gloves of neoprene
or nitrite rubber.
EYES: Use solvent resistant safety eye wear with
Splashguards or side shields to prevent eye
Contacts
BREATHING: Use half face respirator with type A
Organic vapor filter and class P1 particulate
Filter
OTHERS: Use in a well-ventilated area with explosion-
proof equipment.
VENTILATION: Sufficient ventilation in volume and
pattern
Should provide to keep air contaminant concentration
low.
SAFE HANDLING INFORMATION
STORAGE AND TRANSPORTATION
STORAGE TEMPERATURE: min 10C, max. 400C. Store cool
at constant temperature.
CONTAINER TYPE AND MATERIAL: plastic bucket.
CONDITIONS TO AVOID: Heat, open flame, or sparks
TRANSPORTATION: By road and water (Never by air)
HAZARDOUS POLYMERISATION: Will not occur
SPILLS: Keep spectators away and avoid breathing vapors.
Floor may be slippery, be careful to avoid falling.
Dike and curtail spill with inert materials, e.g.
sand. Transfer liquid to containers for recovery
or disposal and solid diking material to separate
containers for disposal. Keep spills and as much
as possible, cleaning run off out of municipal sewers
and opens bodies of water.
DISPOSAL: Incinerate the liquid and contaminated diking
material at a permitted facility, or otherwise, dispose
off in accordance with all applicable regulations.
EXTINGUISHING MEDIA: Foam, carbon dioxide, Dry chemicals
SPECIAL FIRE FIGHTING Wear self-contained breathing
PROCEDURE: apparatus closed container may explode
when exposed to extreme heat.
OTHER INFORMATION: Isolate form heat, electrical equipment, sparks
And open fire.
|
