Percent
non-Volatile (by weight): 60% by volume
Specific Gravity (water=1): 1.0 g/cm
Drying time(dust free): 1-2Hrs
Min interval before over coating: 16 hours
APPLICATION
DATA
Application
surface: Steel, Concrete
Surface preparation: free from dust, grease and contaminants
Method of application: brush
Mixing ratio (with hardener): N/A
Shelf life: 12 months under adequate storage condition
HEALTH
HAZARD INFORMATION
HEALTH
EFFECTS
SKIN:
Irritating to skin upon repeated, prolonged
contact
EYES:
Moderately irritating to eyes.
INHALED:
Vapour or mist is irritating to mucus membranes
and respiratory system.
Excessive inhalation can cause headache, nausea, and dizziness.
SWALLOWED:
Can be harmful if swallowed.
LONG
TERM HAZARD: Repeated and prolonged occupational
over exposure to solvents can damage liver and
central nervous system.
FIRST AID:-
SKIN:
Wash affected area thoroughly with soap and
water
EYES: Flush eyes immediately with plenty of water for
at least 15 minutes and get medical attention.
INHALED:
Provide fresh air, give oxygen or artificial
Respiration if breathing is laboured.
SWALLOWED:
If swallowed dilute by giving two glasses of
water to drink. Do not induce vomiting consult
physician immediately. Never give anything by
mouth to an unconscious person.
ADVICE
TO DOCTOR: Treat symptomatically
PRECAUTIONS FOR USE
PERSONAL
PROTECTION
SKIN:
Wear protective clothing, Gloves of neoprene
or nitrile rubber.
EYES:
Use solvent resistant safety eyewear with
Splashguards or side shields to prevent eye contacts
BREATHING: Use half face respirator with type A
Organic vapour filter and class P1 particulate filter
OTHERS:
Use in a well-ventilated area with explosion-
Proof equipment.
VENTILATION:
Sufficient ventilation in volume and pattern
Should provided to keep air contaminant concentration
low.
SAFE HANDLING INFORMATION
STORAGE
AND TRANSPORTATION
STORAGE
TEMPERATURE: min 10C, max. 400C. Store cool at
constant temperature.
CONTAINER
TYPE AND MATERIAL: Steel drums.
CONDITIONS
TO AVOID: Heat, open flame, or sparks
TRANSPORTATION:
By road and water (Never by air)
HAZARDOUS
POLYMERISATION: Will not occur
SPILLS:
Keep spectators away and avoid breathing vapours.
Floor may be slippery, be careful to avoid falling.
Dike and curtail spill with inert materials,
e.g. sand. Transfer liquid to containers for
recovery or disposal and solid diking material
to separate containers for disposal. Keep spills
and as much as possible, cleaning run off out
of municipal sewers and opens bodies of water.
DISPOSAL:
Incinerate the liquid and contaminated diking
material at a permitted facility, or otherwise,
dispose off in accordance with all applicable
regulations.
EXTINGUISHING
MEDIA: Foam, carbon dioxide, Dry chemicals
SPECIAL
FIRE FIGHTING Wear self-contained breathing
PROCEDURE: apparatus closed container may explode when exposed to extreme
heat.
OTHER INFORMATION: Isolate form heat, electrical equipment, sparks and
open fire.
|