Percent
non-Volatile (by weight): approx. 61% by volume
Specific Gravity (water=1): 1.40-1.50g/cm3
Minimum cure time: 18 hours
Temperature resistance: N/A
APPLICATION
DATA
Method of application: brush or roller
Mixing ratio (with hardener): base to hardener;
3:1 by volume
Shelf life: 12 months under adequate storage condition
HEALTH
HAZARD INFORMATION
HEALTH
EFFECTS
SKIN: Irritating to skin upon repeated, prolonged
contact.
EYES: Moderately irritating to eyes.
INHALED: Vapour or mist is irritating to mucus
membranes and respiratory system.
Excessive inhalation can cause headache, nausea,
and dizziness.
SWALLOWED: Can be harmful if swallowed.
LONG TERM HAZARD: Repeated and prolonged occupational
over exposure to solvents can damage liver and
central nervous system..
FIRST AID:-
SKIN: Wash affected area thoroughly with soap
and water.
EYES: Flush eyes immediately with plenty of water
for at least 15 minutes and get medical attention.
INHALED: Provide fresh air, give oxygen or artificial
respiration if breathing is laboured.
SWALLOWED: If swallowed dilute by giving two glasses
of water to drink. Do not induce vomiting consult
physician immediately. Never give anything by mouth
to an unconscious person.
ADVICE TO DOCTOR: Treat symptomatically
PRECAUTIONS FOR USE
PERSONAL PROTECTION
SKIN: Wear protective clothing, Gloves of neoprene
or nitrile rubber.
EYES: Use solvent resistant safety eyewear with
splashguards or side shields to prevent eye contact.
BREATHING: Use half face respirator with type
A organic vapour filter and class P1 particulate
filter.
OTHERS: Use in a well-ventilated area with explosion-proof
equipment.
VENTILATION: Sufficient ventilation in volume
and pattern should be provided to keep air contaminant
concentration low.
SAFE HANDLING INFORMATION
STORAGE AND TRANSPORTATION
STORAGE TEMPERATURE: min 10C, max. 400C. Store
cool at constant temperature.
CONTAINER TYPE AND MATERIAL: Steel drums.
CONDITIONS TO AVOID: Heat, open flame, or sparks
TRANSPORTATION: By road and water (Never by air)
HAZARDOUS POLYMERISATION: Will not occur
SPILLS: Keep spectators away and avoid breathing
vapours. Floor may be slippery, be careful to avoid
falling. Dike and curtail spill with inert materials,
e.g. sand. Transfer liquid to containers for recovery
or disposal and solid diking material to separate
containers for disposal. Keep spills and as much
as possible, cleaning run off out of municipal
sewers and opens bodies of water.
DISPOSAL: Incinerate the liquid and contaminated
diking material at a permitted facility, or otherwise,
dispose
SPECIAL FIRE FIGHTING Wear self-contained breathing
apparatus. Closed
PROCEDURE: container may explode when exposed to
extreme heat.
OTHER INFORMATION: Isolate form heat, electrical
equipment, sparks and open fire.
|
