Search
 
 
 
 
Paints
Adhesives
Tiles

Auto Refinishes
Wood Finish
Industrial
Marine

 
Locate a store
   
 
Meyer Autocryl & Autobase
 
 
IDENTIFICATION

Description: Two-component paint
Product Name: AUTOCRYL FINISH
Use: For steel and metals surfaces

PHYSICAL DESCRIPTION/PROPERTIES

Appearance: White and other Colour
Viscosity: 60 Seconds (using B4 cup at 270c
Theoretical coverage (m2/lt): 10m2/lt at 40um d.f.t.
Flash Point: base 270C, hardener 28oC
Number of components (Resins): 2
Minimum cure temperature: N/A

 
 
Percent non-Volatile (by weight): approx. 60% by volume
Specific Gravity (water=1): 1.00-1.20g/cm3
Touch Dry approx. 2 hours
Temperature resistance: N/A


APPLICATION DATA

Surface preparation: Appropriate pre-treatment
Method of application: SPRAY
Mixing ratio (with hardener): base to hardener; 3:1 by volume
Shelf life: 12 months under adequate



HEALTH HAZARD INFORMATION

HEALTH EFFECTS

SKIN: Irritating to skin upon repeated, prolonged
contact.

EYES: Moderately irritating to eyes.

INHALED: Vapour or mist is irritating to mucus membranes and respiratory system.
Excessive inhalation can cause headache, nausea, and dizziness.

SWALLOWED: Can be harmful if swallowed.

LONG TERM HAZARD: Repeated and prolonged occupational over exposure to solvents can damage liver and central nervous system.
FIRST AID:-

SKIN: Wash affected area thoroughly with soap and
Water.

EYES: Flush eyes immediately with plenty of water for
at least.
15 minutes and get medical attention.

INHALED: Provide fresh air, give oxygen or artificial
Respiration if breathing is laboured.


SWALLOWED: If swallowed dilute by giving two glasses of
water to drink. Do not induce vomiting
Consult physician immediately. Never give anything by mouth to an unconscious person.

ADVICE TO DOCTOR: Treat symptomatically


PRECAUTIONS FOR USE

PERSONAL PROTECTION

SKIN: Wear protective clothing, Gloves of neoprene
or nitrile rubber.

EYES: Use solvent resistant safety eyewear with
Splashguards or side shield to prevent eye
contact.

BREATHING: Use half face respirator with type A organic vapour filter and class P1 particulate filter.

OTHERS: Use in a well-ventilated area with explosion-proof equipment.

VENTILATION: Sufficient ventilation in volume and pattern
should be provided to keep air contaminant
Concentration low.


SAFE HANDLING INFORMATION

STORAGE AND TRANSPORTATION

STORAGE TEMPERATURE: min 10C, max. 400C. Store cool at constant temperature.

CONTAINER TYPE AND MATERIAL: Steel drums.

CONDITIONS TO AVOID: Heat, open flame, or sparks

TRANSPORTATION: By road and water (Never by air)

HAZARDOUS POLYMERISATION: Will not occur

SPILLS: Keep spectators away and avoid breathing vapours. Floor may be slippery, be careful to avoid falling. Dike and curtail spill with inert materials, e.g. sand. Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for disposal. Keep spills and as much as possible, cleaning run off out of municipal sewers and opens bodies of water.

DISPOSAL: Incinerate the liquid and contaminated diking material at a permitted facility, or otherwise, dispose off in accordance with all applicable regulations.

EXTINGUISHING MEDIA: Foam, carbon dioxide, Dry chemicals

SPECIAL FIRE FIGHTING Wear self-contained breathing apparatus. Closed
PROCEDURE: container may explode when exposed to extreme heat.

OTHER INFORMATION: Isolate from heat, electrical equipment, sparks and open fire.



 
 

 
 
 
 
 
 
 
 
 
 

Locate an Outlet | Contact us | Privacy Policy | Terms
Copyright ©
2006 DN MEYER PLC