BASIC DATA AT 28oC
Mass density approx. 1.1g/cm3 depending on colour
Solid content by volume approx. 31.0%
Recommended film thickness DFT 25um: WFT 80um
Theoretical spreading rate 12.4m3/litre
Drying time (dust dry) 1 hour at 28oC, 3 hours at 5-10oC
Minimum interval before overcoating 24 hours at 28oC, 48hours at 5-10oC
Maximum interval before overcoating no limitations
Shelf life (cool and dry places) 12 months, but a long storage period may affect the brilliancy. Good stirring before use.
Flash point (DIN 53213) 32oC

SUBSTRATE CONDITIONS the steel surface must be clean, dry and free from grease.

INSTRUCTION FOR USE

AIRLESS SPRAY
Recommended thinner no thinner to be added
Nozzle orifice approx. 0.38mm (=0.015 inch)
Nozzle pressure 8-15Mpa (=approx. 80-120 at m 1140-1700psi)

AIR SPRAY
Recommended thinner no thinner to be added
Nozzle orifice 2-3mm
Nozzle pressure 0.3-0.4Mpa(=approx. 3-4 at m 43-57psi)
ROLLER/BRUSH
Recommended thinner no thinner to be added

CLEANING SOLVENT 06-69 (flash point 38oC)

SAFETY PRECAUTIONS
-Paint irritates or affect skin or mucous membrane.
-inhalation of vapour and dust is harmful.

GOOD PERFOMANCE
Apply first coat and heat to working temperature before applying a second coat in accordance with all applicable regulations.